Showing posts with label Dolphin Stamp Set 1. Show all posts
Showing posts with label Dolphin Stamp Set 1. Show all posts

Tuesday, 30 April 2019

Gilded Dolphins

Morning Friends and Crafters. Well I have had a smashing few days. It's been so much fun experimenting with my new collections and making samples for my next visit to Hochanda. It's always exciting and I always love visiting but this time I am even more excited to share the goodies with you. The Dolphin Die is so versatile, it can be used to give so many different looks. Use any of your techniques and experiment, but above all have lots of fun.

You Will Need:

Craftascope 'Bloom & Grow' Stamp Set (only for the card Variation)
Black Card Blank 8 x 6''
Gilding Flakes
Flitter Glue or Similar
Black Card
Phat Foam
Clarity Double Sided Adhesive Sheet

Step 1: Take your card blank, towards the bottom, use the dolphin stamps along with the Flitter Glue and Phat foam to stamp them. Leave the glue to go clear.

Step 2: Use your chosen Gilding Flake to cover the design. Rub away any excess gently with your finger. Finally rub over with a schoochy to remove the finer pieces and burnish to give a beautiful shine.

Step 3: Repeat step 1 with your chosen sentiment. These stamps are high quality and dont need excess pressure. Pressing too hard will only result in a splayed image.

Step 4: Repeat step 2 with your sentiment. When done, edge the card with the Flitter Glue, when dry add the flake . It gives a wonderful deckled edge to the sentiment. Next cover a piece of card with a double sided adhesive sheet, cut to  give a 5 1/2'' square, remove the protective sheet and cover with the gilding flake as before.

Step 5: Cut the dolphin die from black card, then use the outer die to cut and emboss the edge. Layer this onto your gilded background and mount onto your base card. Finally position your sentiment and secure with 3D Glue Gel.

It's been great sharing this project with you today, I do hope you enjoyed using the die. I really would love to see all of the projects and creation you make. If you are not already a member and you use Facebook, It would be great to see you on the 'Craftascope Makes' page, where you can share any of your Crafting projects.

Here is a variation of the card using a different sentiment and just the dolphins stamps. Just a quick reminder, when using flitter glue or similar, please wash immediately or at least put them in water to soak.

I hope to see you all soon, for now Take care and Happy Crafting.



Wednesday, 5 December 2018

Dolphin Tangle

Morning everyone, something a little different again today, using the Dolphin Stamps from my collection. I have used them with the wonderful pattern stamps from Leonie to fill them with patterns and create the frame, giving the look of a tangle. I designed my stamps to have the open spaces to allow more ways for them to be used. You can either fill these with stamps or take the time to make your own wonderful Zentangle patterns. I have left this monochrome, but you could easily add colour for a totally different feel to your card.

You will Need:
The 'First Collection' From Leonie
Black Versafine Ink Pad
Black Fine Liner
Copier Paper for Masking 
Low Tack or Washi Tape
Ruler
White Card
Black Card Base

Step 1: First stamp your dolphins  and sentiment in position on your card. Then use a ruler and fine liner to draw a frame around your images.

Step 2: Use copier paper and/or washi tape to mask the frame, then use one of Leonie's stamps to fill the frame you have made.

Step 3: Next use a selection of stamps to fill the various parts of the dolphins. You can easily make a mask by stamping the same dolphins onto copier paper and cutting them out. You can do the same for the inner sections to allow you to stamp within the design. If you tangle by hand, then the masking is not needed.

Step 4: Mount your card onto a black card base with Tacky glue to give you the finished card.

If you would like to get your hands of the last few of my collection they are only available at Hochanda or via my Etsy site, a link is at the top of my blog (CRAFTSCOPE ETSY SHOP).

Just a little extra here: If you have not shopped with Hochanda before, here is a voucher code giving you 30% off your first purchase (FEY5JBP7) it can be used for any purchase, feel free to share it.

Thank you ever so much for stopping by today. I hope you have enjoyed the tutorial along with the finished card. Do stop by again to see what else I have to share. For now Take care and Happy Crafting.xxx




Tuesday, 4 December 2018

Double Mixed Media Journal page

Morning Friends and Crafters, the project I am sharing with you today is all about layering, it was really fun to do. Lots of stamping with all sorts of items, adding texture and lots of different layers to give the pages a real feel of dimension. The Funky Tree from Leonie makes another appearance as do some of the other stamps from her collections, as well as some statement stamps from AllandCreate. There's lots of colour used in this one from Indigoblu, Amsterdam Acrylics & Eco Green.

You will need: 
AALL&Create stamp selection
Leonie Pujol Stamps Selection, including Funky Tree.
Selection of Texture Stamps
Eco Green Acrylics
Amsterdam Acrylics
Indigoblu Acrylics
Gelly Roll Pens
Friendly Plastic
Pebeo Silver Gilding Wax
Selection of Rice Papers
Versafine Black Ink
Small, Medium and Large Bubble Wrap
Selection of lids (Different Sizes)
Brayer
White & Black Gesso
Round Epiphany Tool and Acrylic Cap or glossy accents

Step 1: HAVE FUN!!! Choose a selection of colours you like, here I've used Eco Acrylics in Blueberry, Mulberry, Light Blue and White. Add blobs across the pages and using an old store card or card, fingers or some sort of spreading tool, create swirls, spread out to make lovely patterns. On your glass mat, mix Blueberry with a little amount of black to deepen the colour. Dip your lids in this to create a series of circles around your pages in different sizes. Use a brush to give an edge to your page coming in from the edges in a sweeping motion to create some sort of frames project, (See Photo)

Step 2: Using the same colour as used for the background, now stamp with some texture stamps to add more depth. Take a contrasting colour and a brush to add a rough panel and some crosses or marks on your pages, this keeps the pages united. Deepen the colour a little either using some of the deeper Amsterdam Acrylic Green or a black and soften the lines a little. Don't worry if you go over some of the circles.

Step 3: Add some Indigoblu Townhouse Teal, which really contrasts with the lime green. Use this with the texture stamps as well, to really add to those layers.

Step 4: Take some medium Bubble wrap with the mulberry and blueberry, use a brayer to smooth colour onto the wrap and stamp on your pages one colour at a time. Use the 2nd generation of paint to to really let the underneath show through.

Step 5: Use the small bubble wrap now, in the same way as before but this time with the lighter blue.

Step 6: Take a stencil with even smaller circles and to add a touch of brightness and drama use the oranges from the Amsterdam Acrylics, they really let the background come through but give a lovely look too and give the pages a kick.

Step 7: Now for adding even more interest and layers to the page, this time with some rice paper, This still allows the background to show through slightly too which is great for more depth. Once dry use the bubble wrap and the same colors as before to soften and blend the edges.

Step 8: Next for some stamping, once the last layer is dry of course. Choose a selection that you like, here I have used allandcreate on both pages as a focal image and as a page edger along with some of Leonie's stamps, you really want to arrange your stamped images to draw the eye in and keep it on the page to see and take in all the details, rather than wonder off.

Step 9: Now fill most of the circles with white Gesso, this will make the colours in them pop more later and seem more vibrant. Leave a few that show off the wonderful background patterns made earlier. A little bit like windows.

Step 10: Try to use colours that you have used before to fill the circles, this keeps the page unified and stops it jarring. Once these are dry add some of the inspirational words and phrases, make up your own too by mixing the stamps, like I have here and shortening them for a totally different word. I've used Leonie's scribbled circles stamped on the page and coloured with gelly roll pens. I have stamped into friendly plastic with words and rubbed them over with silver gilding wax. Use a white gel pen to add detail around some of the circles. Finally when dry add 'Trent', position the stencil and ink through with Versafine Black ink.

Step 11: On a separate piece of card use your brayer and a couple of colours used in the pages to make a background.

Step 12: Stamp one of the small sentiments onto it and use the Epiphany tool and resin cap to make the cabochon. You could do this with a basic die and add glossy accents if you dont have the tool.

Step 13: Add this resin piece to one of the smaller circles on your page. In another stamp the profile stamp a couple of times. Use some inspiring words in some and some part stencils in some others, again to keep the pages unified and harmonious.

Step 14: To finish your piece add some highlights to your pages using a white gel pen.

Just a little extra here: If you have not shopped with Hochanda before, here is a voucher code giving you 30% off your first purchase (FEY5JBP7) it can be used for any purchase, feel free to share it.

My Collection is still available from Hochanda and they have kept the generous discounts and Flexi but I know there isn't a great deal left. I doubt I can restock due to minimums orders. 

It is also available on my Craftascope Etsy Shop, while there is stock available after my Hochanda Show.

As you know I love writing my blog and helping as much as I can, well I would really love for you to add you support by adding me as a favourite blog. All you need to do in that section is choose other and add my blog address nickinbarnsley.blogspot It would be great to get a mention even if I dont come anywhere.

Here is the link to add your support for all of the categories. 
https://www.britishcraftawards.com/

I do hope you have enjoyed the tutorial along with the finished pages I have shared with you today, Maybe you will have a go yourself, It would be great to see what you do with my collection. I hope you will pop by soon to see what I have to share with you. For now Take care and Happy Crafting.xxx

Friday, 30 November 2018

Grace

Morning Friends and Crafters. Today I am sharing a card that is just perfect for Batch making. Great for making for charities and fund raisers as well as raising funds for yourself too. These would wonderful boxed as a set, maybe a selection make in different colours. They make wonderful Thank You cards and as mentioned, changing the look is as easy as changing the colour strip. This uses just a few stamps from Sara's wonderful Enchanted Forest range along with a stamp from my collection and just 3 Distress Oxides. I hope you enjoy the tutorial.

You will Need:
Enchanted Forest 'Dandelion' Die and Stamp Collection
Enchanted Forest Peg Stamps
Distress Oxides: Candied Apple, Squeezed Lemonade and Blueprint Sketch
Copier Paper
Stick n Spray
Versafine Black Ink Pad
White Stamping Card 8 x 6'' Approx
Mat Black Card 8 1/4 x 6 1/4'' Approx
Centura Pearl Card Base Silver/White 8 1/2 x 6 1/2

Step 1: Tear your paper to give you a slightly wobbly line. Secure to your card using a little Stick n Spray.

Step 2: Use the oxides to apply the colours either side of your card first, then add the center colour overlapping the one either side to give a nice blend. Remove the copier paper mask and then remove any excess adhesive with a piece of kitchen roll.

Step 3: Position and stamp the large 'Grace' stamp with the black ink. It has a really nice open text, that really lets the colour shine through, tying it together with the background. Next stamp your beautiful dandelions, elongating the centre stem. To do this mask off the dandelion with copier paper, all but the lower part of the stem, ink up your stamp and join it at the base. Add the little seed heads, blowing in the wind, make sure to stamp some off the page.

Step 4: Measure your black matt to make sure it leaves a narrow border around you topper, dont secure just yet.

Step 5: Gut this layer using any of your dies, not only does this save a lot of card, it reduces waste and postage, saves money and can be used for another project.

Step 6: Layer this onto your base card with tacky glue.

Step 7: Add your 'Grace' Topper to your card, it makes a beautiful card for any occasion, there are plenty more wonderful and uplifting words and phrases in my collection. See my live show link below.

My collection is still available at a wonderful offer price on Hochanda with Freedom Discount and Flexi Buy on the full collection. HOCHANDA LINK. I also have the collection available at my CRAFTASCOPE ETSY SHOP.

If you did miss my very first Hochanda show and the launch of my collection, it is still available on Rewind, via the Hochanda Website, it was last aired on Tuesday 20th November so please be quick.


Just a little extra here: If you have not shopped with Hochanda before, here is a voucher code giving you 30% off your first purchase (FEY5JBP7) it can be used for any purchase, feel free to share it.

Thank you ever so much for popping by today, I do hope you enjoyed the tutorial along with the finished card. I hope you will stop by again to see what else I have to share. For now Take care and Happy Crafting.xxx

Wednesday, 28 November 2018

Mica Face

Morning Friends and Crafters, so pleased you are joining me again today. I thought I would share something easy, but really striking and effective. It would make a really fun card for a guy or any occasion really, depending on what you add or the sentiment you choose.For the background layer I have used the script stamp from Leonie, it's an amazing stamp to create backgrounds or add texture, interest or dimension to any project, it's out in my craft room constantly.

You will Need:
Selection of Mica Powders
Versamark Ink Pad
Anti Static Pad
Soft Brush
Crafters Companion 'Spray n Shine'
Black Gloss Card
Purple Centura Pearl card
White Card
Black Card Base
Collall Tacky Glue
Collall 3D Glue Gel

Step 1: Wipe over your card with the anti static bag, position your stencil and ink through with the Versamark ink pad.

Step 2: Remove the stencil and sprinkle your chosen colours of mica.

Step 3: Use a very soft brush to remove the excess powder and lightly polish the card with the brush. Spray a very light mist of the Spray n Shine to set the mice in place.

Step 4: Repeat the process, this time using the script stamp to create your next layer. Mount your design onto the script background then onto the purple layer before adding it to your card base. Don't forget to gut your card layers with a basic die to save weight and card for other projects.

Step 5:On another piece of gloss card, stamp your sentiment as before and coat with the mica. Brush away the excess and polish with the soft brush, Once again spray with the Spray n Shine. Trim each of the words and mount them onto white card with Tacky Glue.

Step 6: Use 3D Glue Gel to position and secure the words in place on your finished card.


I do hope you have enjoyed the tutorial today and the finished project. I hope to see you here very soon to see what else I have to share with you. Don't forget to visit my Etsy shop if you would like any of the items from my collection, the link is at the top of the blog page. For now Take care and Happy Crafting.xxx


Friday, 23 November 2018

Stitched Mixed Media Face

Hi Friends and Crafters. I am sharing a stitched mixed media project with you today. Something a little different to try out with my collection. This uses a simple chain stitch for the outline and a couple of French Knots for the eyes. The background has been made with Calico with the print for the background pulled from the Gel Press from Clarity. It's great fun to use and a great way of making some really interesting backgrounds for any of your crafty makes.

You will Need:
Versafine Black Ink Pad
Daler Rowney System 3 Cadmium Yellow, Cadmium Red and Ultra Marine.
Brayer
Burgundy/Red Embroidery Thread
Black Card
White Stamping Card
Calico

Step 1: Start with the background on your calico. Add and spread each colour in turn using your Brayer. Use Red, then Blue and finally the yellow. Firmly and evenly smooth the calico over the surface and lift the print. Leave to dry thoroughly.

Step 2: Using the remainder of the ink on your plate, repeat with your card. Lift the print and leave too dry.

Step 3: Position the stencil onto the calico and using either a fine liner or graphite pencil, trace around the outside lines of the whole design. Add the Calico to your hoop and stitch your design use 3 threads and use the chain stitch. This fives a really nice raised result, with dimension and texture while allowing smooth turns around the curves. Use a darker thread for the eyes and a couple of french knots to add life to the eyes. Ray the edges of your cloth to give more interest and texture.

Step 4: Choose a selection of words that appeal to you from across both stamp sets. Use Versafine black ink to stamp onto your gel printed card. Use Tacky glue to mount them onto black card, leaving a narrow border.


Step 5: Mount your fabric onto black card using Collall Tacky Glue. Then use 3D Glue gel to position and secure your words around the face.

Another thing, here is a 30% off voucher to use on your first order (anything) from Hochanda, use code FEY5JBP7.

As you know I love writing my blog and helping as much as I can, well I would really love for you to add you support by adding me as a favourite blog. All you need to do in that section is choose other and add my blog address nickinbarnsley.blogspot It would be great to get a mention even if I dont come anywhere.

Here is the link to add your support for all of the categories. 


Many thanks for joining me today. I hope you have enjoyed the tutorial along with the finished project. It would be great for you try it out especially if it's something you have not done before. This makes a great wall hanging, a page for a journal or scrapbook page and a smaller version would make a lovely stitched card. Why not try it as a partial face with a boarder around it, whatever you do have fun and enjoy what you do. For now Take care and Happy Crafting.xxx



Thursday, 22 November 2018

Rusty Journal Cover

Morning Friends and Crafters, A few days ago I shared a rusty project with you. Having experimented on the paper towel and creating a really nice piece I decided to take it a step further and make a cover for my Pink Pig journal. After discovering how well the rust works with stencils, it's opened up a whole new use for them. One tip for using them is to soak them overnight when using them in this way, just to make sure it all comes off.

You will Need:
Clarity Mask 'Chain Link'
Black Texture Paste
Powertex Rusty Powder
Inventors Asylum Rust Spray** or 50/50 Vinegar and Water
Black Friendly Plastic
Boiling Water
Pebeo Silver Gilding Wax 
Scrap Denim (Old Jeans)
Black Gesso
White Gel Pen

**The Rust dye formula, will give you the choice of colour either bright or dark, bright giving the typical rusty look or dark giving a grayer shade. 

Step 1: The texture paste will need to dry so I recommend leaving this overnight, the details is excellent on the stencil and well worth the time. Spread the texture past through the stencil in various places, not to worry if you get smudges. Next add some Gesso here and there to creak a broken fame around the journal. The journal over has it's own texture as well so work keeping some of it clear.

Step 2: Once the cover is dry you can add some highlights with the gilding wax.

Step 3: Dip some friendly plastic in boiling water and stamp your words into it. Once cool highlight these with the silver wax also.


Step 4: Paint a selection of cogs with black Gesso, Then using the acrylics add a rusty look to them.

Step 5: Take your denim and spray with the vinegar mix or rust dye spray. Sprinkle the rust powder through the stencil. Repeat with sections of the chain link fence. Leave overnight, the denim holds the liquid well so you shouldn't need to re wet the fabric. Once dry brush off the excess, then use a needle to add the frayed details around the edges.

Step 6:Use Collall Tacky glue to secure the denim onto your journal.

Step 8: Use Glue Gel to arrange and secure your other elements to complete the project.

Thank you for joining me today, I really hope you have enjoyed the tutorial along with the finished piece. Please come by again to see what else there is to share with you. Take care and Happy Crafting.xx